Get Energy-Efficient AC Replacement
Timely Air Conditioner Replacement Service
Lower utility bills with a new energy-efficient air conditioning system. One Hour Heating and Air Conditioning® of Ogden provides air conditioning replacement in South Ogden. The service includes a full-system upgrade, EPA-compliant removal of your old equipment, installation of a matched indoor coil and outdoor condenser, and refresh of critical electrical and drainage components.
Owned and operated by Matt and Sarah McFarland, we bring "farm-grown" integrity to every system upgrade. We don't just "swap boxes," we engineer custom cooling solutions designed to handle South Ogden’s 4,675-foot altitude.
Why choose the McFarland family as your AC replacement contractor?
- Always On Time or You Don’t Pay a Dime®: If our AC technician is not at your door when promised, we won’t charge the service call.
- UWIN® 100% Satisfaction Guarantee: We stand behind our work with a national standard of excellence and local family pride.
- StraightForward Pricing® Guide: You receive a guaranteed, written quote before any work begins.
- Flexible Financing: Get a tailored payment plan for your credit situation.
- Free Furnace with High-Efficiency AC Purchase: We offer a free furnace with the purchase of an AC.
- Precise Manual J Load Calculations: We calculate your home's exact "thermal envelope" to ensure your new unit is perfectly sized for the South Ogden climate.
Call (801) 405-9435 to book an air conditioning replacement in South Ogden, Utah.
Is It Time to Replace Your South Ogden AC?
If your AC unit is over 15 years old, uses R-22 refrigerant, or you have unexplained high energy bills, it may be time to replace it.
Most cooling systems in South Ogden begin to show signs of significant mechanical fatigue after 12 to 15 years of service. If your current unit was installed in the early 2010s, it is likely operating well below modern standards. Today’s SEER2-rated equipment is engineered to be up to 50% more efficient than older models.
Furthermore, the industry-wide phase-out of R-22 refrigerant (Freon) has made maintaining older units a massive financial burden. Since R-22 is now obsolete, the cost of sourcing it for repairs has skyrocketed, often making a simple recharge more expensive than it is worth. Transitioning to a high-efficiency system that utilizes R-32 is the most sensible long-term investment. It is environmentally responsible and significantly cheaper to maintain.
Finally, keep a close eye on your monthly utility statements; if your energy bills are consistently rising despite regular professional maintenance, your compressor is likely losing its mechanical edge. As the compressor struggles to move heat effectively from your indoor air to the outdoors, it consumes more power to do less work. Replacing a failing compressor with a modern, high-performance unit puts an end to escalating costs.
The South Ogden AC Replacement Process
Our precision installation starts with a Manual J load calculation to size your system perfectly, followed by a custom design tailored to your budget and South Ogden’s specific climate. Next, you get an upfront pricing before work begins. We then install the new indoor evaporator coil and level the outdoor condenser with updated electrical components for maximum safety. Finally, we perform a high-tech calibration using digital manifolds to fine-tune the refrigerant charge for our specific altitude, concluding with a comprehensive walkthrough.
Step 1: Manual J Load Calculation
We never "guess" the size of your new unit based on your old one. We begin by performing a Manual J Load Calculation, which takes into account your home’s square footage, window orientation, insulation R-values, and local South Ogden climate. This ensures your new SEER2-rated system is perfectly sized to prevent the "short-cycling" common with oversized units and the inadequate cooling of undersized ones.
Step 2: Custom System Design & Selection
Based on the load calculation, we present you with options from our StraightForward Pricing® Guide. Whether you choose a high-performance Lennox central air system or a space-saving Daikin Fit side-discharge unit, we help you select a system that balances your upfront budget with long-term energy savings. At this stage, we also identify any necessary ductwork modifications to ensure proper airflow.
Step 3: EPA-Compliant Removal & Recovery
Our AC technicians begin the installation by safely recovering the old refrigerant (such as R-22 Freon) according to strict EPA guidelines to protect the environment. We then remove the old outdoor condenser and indoor evaporator coil, keeping your home and landscape protected throughout the process.
Step 4: Indoor Evaporator Coil Installation
The "cold" side of your AC is installed inside your home, typically on top of your furnace. We install a new, high-efficiency evaporator coil that is specifically matched to your outdoor unit. We pay close attention to the plenum (the box that connects the coil to your ductwork), sealing it hermetically to prevent "conditioned air" from leaking into your utility room.
Step 5: Outdoor Condenser & Electrical Integration
We move to the outdoors to place the new condenser unit. We ensure the unit sits on a stable, level base to prevent oil migration and vibration. Next, we install a new disconnect box and a flexible electrical whip. This ensures your high-efficiency motor is receiving clean, safe power and meets current South Ogden building codes.
Step 6: Line Set Integration & Nitrogen Purge
We connect the indoor and outdoor units with new copper line sets. During the brazing (welding) process, we flow dry nitrogen through the lines. This critical step prevents internal oxidation (soot), which is a leading cause of premature compressor failure in cheaply installed systems.
Step 7: The Triple Evacuation Process
Before adding refrigerant, we use a high-vacuum pump to perform a "Triple Evacuation." We use a micron gauge to verify that all moisture and non-condensable gases are removed from the lines. We look for a vacuum decay test of 500 microns or less to ensure the system is perfectly sealed and will operate at maximum efficiency.
Step 8: System Commissioning & Calibration
Once the vacuum is verified, we release the refrigerant (R-32) and start the system. We don't just "check for cold air," we use digital manifolds to measure the subcooling and superheat. This allows us to fine-tune the refrigerant charge to the exact ounce, compensating for the specific length of your line set.
Step 9: Final Walkthrough & UWIN® Verification
To conclude the process, your technician will perform a final walkthrough. We show you how to operate your new smart thermostat, explain the maintenance requirements for your new filters, and provide you with all warranty documentation. Every AC installation is backed by our UWIN® 100% satisfaction guarantee, meaning we aren't finished until you are happy with your system.
Call (801) 405-9435 for more information about our AC replacement process.
Ductless Mini-Split Installation as a Replacement
One Hour Heat and Air Conditioning of Ogden provides ductless minisplit installation services. We perform a room-by-room assessment to determine the ideal placement for indoor air handlers, ensuring maximum comfort without the "clutter" of window units.
If your aging central air conditioner is failing, you may not have to replace it with the same bulky, duct-dependent system. For many homeowners in South Ogden, particularly in neighborhoods like Marlon Hills, where older homes may have "hot spots" or in Eastwood homes with supplemental additions, a ductless mini-split system is the ultimate high-efficiency replacement. These systems eliminate the need for traditional ductwork, which can lose up to 30% of its cooling energy through leaks and poor insulation.
By choosing a mini-split installation, you can independently control the temperature in each room. This is powered by advanced Inverter Technology, allowing the system to ramp up or down precisely to meet the demand, rather than simply cycling on and off at full blast. It is a quieter, more efficient, and space-saving alternative that fits perfectly into the tighter residential lots common in the 84403 areas.
Call (801) 405-9435 to get a new ductless minisplit unit in South Ogden.
Get an Air Conditioning System Made by a Leading Brand
Whether you are looking for a high-performance central air system or a space-saving side-discharge unit, we have the expertise to install:
- Lennox
- Carrier
- Trane
- Daikin
- Mitsubishi Electric
- Goodman
- Bryant
- York
- Rheem
We Service All Neighborhoods in South Ogden (Zip: 84403)
South Ogden isn't just a place on a map to us; it’s where we live and work.
Whether you’re tucked away in the quiet hills or living near the main thoroughfares, the McFarland family brings "farm-grown" integrity to every neighborhood in the 84403 area, including:
- Marlon Hills
- Briarwood
- Eastwood
- Harrison Blvd Corridor
- Pleasant Valley
Call (801) 405-9435 to speak with a qualified AC replacement contractor.
Visit our office:
One Hour Heating & Air Conditioning
1501 W 2650 S #103, Ogden, UT 84401
Open 24 hours
